Projects Our services About us Contact

Isogum

One part, ready-to-use, elastomeric waterproofing   membrane for interior and exterior applications.

Description

Isogum is an elastomeric modified bitumen waterproofing membrane, industrially manufactured by impregnation of the reinforcement with the waterproofing compound based on distilled bitumen modified with elastomeric polymers of the latest generation, which gives to the compound superior technical characteristics. The composite reinforcement, made of nonwoven spunbond polyester in combination with fiberglass, conveys good mechanical characteristics, excellent dimensional stability and elastic performance.

Uses

Bridge

Water canal

Roof

Ceramic surface

Wet places

Types
25S 30S 30D 30D AL 40D

25S

30S

30D

30D AL

40D

Carrier fiberglass
Thickness 2.5 mm
Bitumen contribution APP / SBS
Heat-resistance 110 C°
Softening point 130 C°
Cold bending -15 C°
Tensile strength 350 / 200 N/5cm
Breaking strain 2 / 2 %
Top surface PE *
Bottom surface PE
Roll size 10 m2
Carrier fiberglass
Thickness 3.0 mm
Bitumen contribution APP / SBS
Heat-resistance 110 C°
Softening point 130 C°
Cold bending -15 C°
Tensile strength 350 / 200 N/5cm
Breaking strain 2 / 2 %
Top surface PE
Bottom surface PE
Roll size 10 m2
Carrier Polyester/fiberglass
Thickness 3.0 mm
Bitumen contribution APP / SBS
Heat-resistance 110 C°
Softening point 130 C°
Cold bending -15 C°
Tensile strength 600 / 300 N/5cm
Breaking strain 25 / 25 %
Top surface PE
Bottom surface PE
Roll size 10 m2
Carrier Polyester/fiberglass
Thickness 3.0 mm
Bitumen contribution APP / SBS
Heat-resistance 110 C°
Softening point 130 C°
Cold bending -15 C°
Tensile strength 600 / 300 N/5cm
Breaking strain 25 / 25 %
Top surface AL*
Bottom surface PE
Roll size 10 m2
Carrier Polyester/fiberglass
Thickness 4.0 mm
Bitumen contribution APP / SBS
Heat-resistance 110 C°
Softening point 130 C°
Cold bending -15 C°
Tensile strength 600 / 300 N/5cm
Breaking strain 25 / 25 %
Top surface PE
Bottom surface PE
Roll size 10 m2
  • * S - Single layered fiberglass isogum
  • * D - Double layered fiberglass and polyester felt isogum
  • * PE - Polyethylene film
  • * AL - Aluminum foil
Our products can be from 2,5mm to 4.0 mm in thickness and with one or two layers (fiberglass/polyester) according to demand. Also the outer layer can be with aluminum foil and polyester.